Glass bongs are the most common option within water filtration paraphernalia, valued for the chemical neutrality of the material — glass does not impart residual flavor to the smoke — and for the visibility of the water and smoke during filtration, allowing you to control the water level and the condition of the piece at all times. At Edabea, you will find a selection of crystal bongs in various formats and configurations, including compact models, mid-height pieces, ice bongs with notches for ice, and large models, featuring different combinations of chillum, joint, and carb system. If you are looking for other materials, you can also check out our categories for acrylic bongs and ceramic bongs, or return to the general category of bongs.
Among the references available in Edabea's crystal bongs catalog, we highlight the following models with their verified technical specifications. The complete catalog can be accessed directly in the category:
| Model | Height | Joint | Chillum | Highlighted Features |
|---|---|---|---|---|
| Micro Glass Bong | 10 cm | — | Removable diffuser | Kick hole, sidecar mouthpiece, compact format |
| Colored Glass Bong | 17 cm | — | Standard | Includes carrying case, colored finish |
| Multi Leaf Hangover 26 cm | 26 cm | 14.5 mm | Removable 14.5 mm diffuser | Kick hole, ergonomic curved neck, stable hollow base |
| Free Fall Boost 35 cm | 35 cm | 14.5 mm | Chillum with bowl included | Extra thick glass, tube diameter 45 mm |
| Multi Leaf 40 cm | 40 cm | 18.8 mm | Removable 18.8 mm diffuser | Sliding bowl, kick hole, hollow base, diameter 45 mm |
| Ejector Ice Bong | S 18 cm / M 30 cm / L 38 cm | — | Standard | Notches for ice, reinforced mouth ring, compatible with Eject-a-Bowl system, variable color |
The glass bong catalog includes more references than those shown. To see the complete selection, explore the category directly.
The height of the bong directly determines the volume of the smoke chamber and the smoke's journey through the water before reaching the mouthpiece. More compact models (10–18 cm) are easier to handle and transport; mid-height models (26–30 cm) offer a balance between portability and filtration; taller models (35–40 cm) maximize the smoke's travel through the water and the volume of the hit, with greater presence and stability thanks to the base.
The thickness of the glass wall is the determining factor for how resistant the piece is to accidental bumps. In Edabea's catalog, the Free Fall Boost model at 35 cm is made of extra thick glass, giving it greater structural solidity compared to standard wall models. In general, greater thickness translates to more weight and greater durability, though also to a higher price.
The joint is the connection point between the chillum and the bong base, and its diameter determines compatibility with replacement bowls and chillums. The 26 cm models in the catalog use a 14.5 mm joint — the most common standard for medium-sized bongs — while the 40 cm model uses an 18.8 mm joint. An accessory designed for a 14.5 mm joint is not compatible with an 18.8 mm joint. Before purchasing any replacement, check the joint diameter of your model.
The diffuser chillum incorporates grooves or holes at the submerged end in the water, which divides the smoke flow into multiple smaller bubbles and increases the surface area contact with the water. The result is more efficient filtration and a greater reduction in smoke temperature compared to a non-diffuser chillum. The Micro Bong, Multi Leaf Hangover, and Multi Leaf 40 cm models in the catalog feature removable diffuser chillums, making it easier to clean the piece independently.
Some glass bong models feature ice notches inside the tube: a series of protrusions that allow ice cubes to be placed so the smoke passes through them before reaching the mouthpiece, further reducing its temperature compared to water filtration alone. The Ejector Ice Bong is the model in Edabea's catalog with this feature, available in three sizes (S 18 cm, M 30 cm, L 38 cm) and compatible with the Eject-a-Bowl system for more practical bowl management.
These are the two most common carburation systems in glass bongs. The kick hole is a side hole that is covered with a finger during inhalation and released at the end to complete the hit with a burst of air. The sliding bowl achieves the same effect by removing the bowl at the end of the hit, allowing for cleaning and bowl replacement independently. Some models, like the Multi Leaf 40 cm, incorporate both systems.
The most effective method for cleaning glass bongs is using isopropyl alcohol (90% or higher) combined with coarse salt as a mild abrasive: the mixture is poured into the base, the mouthpiece and chillum are covered, and shaken to dissolve resin deposits. Isopropyl alcohol effectively dissolves cannabis resin without damaging the glass. Removable chillums can be cleaned separately in the same way.
For basic maintenance, changing the water after each use prevents residue buildup in the base and prolongs the time between deep cleans. In the bong accessories section, you will find THCleaner — a cleaning solution specifically compatible with glass, metal, and acrylic — and 52 cm bong cleaning brushes to reach inside the tube.
Yes — both terms are used interchangeably to refer to the same type of piece. In the context of smoking paraphernalia, "crystal" and "glass" are employed as synonyms to designate bongs made from this material. The differences between models lie not in the terminology but in the technical specifications of each piece: wall thickness, height, joint type, carburation system, and presence or absence of a diffuser.
The main advantage of glass is its chemical neutrality: it does not impart residual flavor to the smoke regardless of accumulated use, unlike acrylic, which may retain some residual flavor if not cleaned frequently. Glass also allows you to see the water and smoke during filtration, making it easier to control the water level and detect when the piece needs cleaning. The trade-off is that glass is more fragile against bumps than acrylic.
A diffuser chillum has grooves or holes at the submerged end in the water. By dividing the smoke flow into multiple smaller bubbles, it increases the surface area contact between the smoke and the water, which enhances filtration and more efficiently reduces the smoke temperature than a chillum without a diffuser. Models with removable diffusers also have the advantage of being able to be cleaned separately and replaced in case of breakage, without needing to change the entire bong.
It depends on the model you have. In Edabea's catalog, the 26 cm (Multi Leaf Hangover) and 35 cm (Free Fall Boost) models use a 14.5 mm joint, while the 40 cm model (Multi Leaf) uses an 18.8 mm joint. The 10 and 17 cm models do not specify a standard joint. A bowl or chillum of 14.5 mm is not compatible with an 18.8 mm joint — check the diameter before buying any replacement accessory. For compatibility inquiries, contact contacto@edabea.com.
The most effective method is to introduce isopropyl alcohol at 90% or higher along with coarse salt into the base, cover the mouthpiece and the chillum outlet, and shake to dissolve resin deposits. Isopropyl alcohol is safe for glass and effectively dissolves accumulated resin. Afterwards, rinse thoroughly with water. For the inner tube, a specific brush like the one available in our accessories section can be used. Changing the water after each use significantly reduces the frequency of deep cleans.
Selection made by the Edabea team. Last updated: April 2026. For inquiries about the availability or characteristics of a specific model, contact contacto@edabea.com.
Feedbacks
